Summary

​​How to view the Solidigm™ Storage Tools or Solidigm Synergy™ Toolkits configuration, as well as how to change it.

View Tool Configuration

Command

• SynergyCLI.exe show -system
• sst show -system

Result

Current tools settings are outputted, which may include:

• EnableLog
  • false by default
  • Needed by Solidigm to debug possible tool issues.
• EnableLSIAdapter
  • SST ONLY!
  • false by default
  • Allow supported commands to pass through specific RAID cards.
• LogFile
  • Path to the tools log.
  • Needed if EnableLog has been set to true.

Toolkit

SST

EnableLog Logging

Command

• SynergyCLI.exe set -system EnableLog=True (or False)
• sst set -system EnableLog=True (or False)

Result

The tool will now keep a verbose log of what is (or is not) happening and it's saved in the tools LogFile.

Process

• Check tool settings
  • See View Tool Settings (above)
• EnableLog needs to be true.
  • SynergyCLI.exe set -system EnableLog=true
  • sst set -system EnableLog=true
• Retry the failing command
• Collect the log (see LogFile path) & send it to Solidigm.
• You may turn off SST logging
  • SynergyCLI.exe set -system EnableLog=false
  • sst set -system EnableLog=false

RAID Card Enablement

• SST ONLY setting.
• Supports Broadcom 7.x API
  • SAS 3808, 3808N, 3908
  • SAS 3816, 3916
  • SAS 9500-16e, 9500-16i, 9500-8e, 9500-8i, 9502-16e, 9502-16i
  • SAS 9540-8i, 9540 16i, 9540-2M2
  • SAS 9560-8i, 9562-16i
  • SAS 9580-8i, 9580-8e

Commands

• sst set -system EnableLSIAdapter=true (or false)

Result

This command enables supported SST features to pass through the card to the drives.

Process

• Check SST settings: sst show -system
• If a RAID card is supported, run:
  • sst set -system EnableLSIAdapter=True
    

Questions? Check out our Community Forum for help.

Issues? Contact Solidigm™ Customer Support:
[Chinese] [English] [German] [Japanese] [Korean]