Secure Erase will remove all user data from the drive!

The Secure Erase functionality is compatible on the following operating systems if the conditions below are true.

Compatible operating systems:

• SATA: Supported Windows* 7 only and Linux*
  • Newer versions of Windows* block this capability.
• NVMe*: Windows* and Linux*

Supported conditions:

• Solidigm™ SSDs only.
• Drive is not the primary system drive.
• No partitions on the drive.

1. Launch the "Solidigm Synergy™ Toolkit".
2. Locate correct SSD, in the Drives tab.
3. Select "Secure Erase" tab.
4. Click the "Erase Now" button.
5. Read the Secure Erase Warning Popup.
   • Click "Run Erase" to proceed.

1. Open the CLI as admin.
2. Get reference to drive.
3. Execute the command:
   • SynergyCLI.exe delete -ssd <ref>
4. Read the warning message:
   • Type "Y" and press "Enter."

1. Launch the "Solidigm™ Storage Tool."
2. Select "Secure Erase."
3. Locate the correct drive
   • Click the "Secure Erase" button.
4. Read the warning message.
   • Click "Yes" to proceed.

1. Open the CLI as admin.
2. Get reference to drive.
3. Execute the command:
   • sst delete -ssd <ref>
4. Read the warning message:
   • Type "Y" and press "Enter".